750 Indicator - Hex File Download

Effective 11/02/2007
• This software changes fixes the problem of not completely charging the batteries.

750.zip
To download file, right-click on the link above and select "Save Target As"

EMR/EHR CONNECTIVITY
Detecto's 758C indicator supports several formats and techniques for transmitting data. Data transmission may be initiated via computer command or operator input and transmitted via the RS-232 serial, USB, or Ethernet ports.

The following data/information will be sent via the selected port:

Time, Date, ID, BMI, Height, Weight <CR><LF>

Time= hh:mm
Date= mm/dd/yy
ID= xxxxxxxxxxx (patient ID)
BMI= xx.x (percentage)
Height= x' xx.x" or xx.x cm (inches or centimeters)
Weight= xxx.xuu G (gross weight)

ASCII Output String:
hh:mm,mm/dd/yy,xxxxxxxxxxx,xx.x,x' xx.x",xxx.xuu G<CR><LF>

Windows XP and older versions, 32-bit
Effective 3/21/2010

758c_USB_Driver.zip
To download file, right-click on the link above and select "Save Target As"

758C USB Driver Installation Guide PDF
(Click to Download PDF)

Windows 7, 64-bit
Effective 3/4/2011

758c_x64.zip
To download file, right-click on the link above and select "Save Target As"

758C USB Driver Installation Guide PDF
(Click to Download PDF)

To download file: Right click on "WinDDE.zip" - then Select "Save Target As"
(11 MB EXE file - zip)

Version 2.19  05-29-2007 - Added dialog for spreadsheet customization, removed dependency on Access database for configuration settings, and separated configuration files, indicator profiles and device profiles into separate file for ease of replacement.

Version 2.16  01-17-2006  - Modified to not use LSRMST_INSERT which may cause problems with some USB-Serial converters.

Version 2.15  01-16-2006 - Added 758C device profile. This will capture time/date, ID, BMI, Height, Weight – Gross, Tare, and Net.

Version 2.15  11-17-2005 - Modified to allow up to 20 items for print capture.

Version 2.14  09-08-2005 - Added feature for WinDDE to be a TCP/IP server to allow socket connections to receive weight in SMA on demand format. Use “General Setup” to set the TCP/IP port to be used as the server. Make sure the port is opened in the firewall. Other computers on the network can then connect to the WinDDE computer. For example, use Hyperterm for a Winsock connection, Type “W” and ENTER to receive the weight in SMA format. Type “A” and ENTER for the first line of the about information. Type “B” and ENTER for each additional line of about information.